Tower Tech’s rectangular cooling tower is available in different capacities and shapes. The warm water enters into the cooling tower by the inlet pipes and leaves out after decreasing the temperature. To increase the surface area, the hot water is splashed through the non-clogging splash caps over the fills/packing. Concurrently, the outside dry air is induced to the cooling tower with the efforts of cooling tower motor placed on the top.

Owing to the counter contact of air and water, the evaporation will be resulted in the
temperature drop. The air inlets are restricted to the lower part of the casing walls.  The air after passing through the functioning area leaves most of the entrained moisture in the new and the effective system of drift eliminators.