Simrit Oil Seal BADUO
In stock
by SPECTRUM HYDRAULICS TRADING FZC
On Request
Â
Material
Acrylonitrile-butadiene rubber
Code
72 NBR 902
Hardness
72 Shore A
Metal insert
Unalloyed steel DIN EN 10027-1*
Spring
Spring steel DIN EN 10270-1
Individual dimensions have 2 metal inserts or 1 metal insert in the matched form.
75 FKM 585 and 75 FKM 595 on enquiry.
Operating conditions
Media
Mineral oils, greases, synthetic oils*
T
-40…+100 ° C
short term up to…+120 ° C
V
To 5 m/s
P
To 0.05 Mpa /0.5 bar
It is to be noted that the maximum operating temperature of 80 ° C must not be exceeded.
Maximum permissible values depends on the other operating conditions.
Tolerance
ISO h11
Runout
IT 8
Roughness
Ra=0.2…0.8 mm
Rz= 1.0…5.0 mm
Rmax = <6.3 mm
45…60 HRC
Finish
No lead; preferably plunge ground
Housing bore
ISO H 8
Roughness metal outer surface OD
Rz = 10…25 mm
Careful fitting according to DIN 3760 is a prerequisite for the correct function of the seal. ® Technical Manual.
If you are not Verified Buyer then Please Verify Your Email to get Quotes from Verified Suppliers.