特征 

1、盐雾试验箱结构：外壳为全防腐结构，采用多层玻璃纤维增​​强聚酯树脂制成，并采用耐腐蚀材料构造。

2.独特的设计：喷雾面积大，流量大，与盐雾功能下雾化溶液相比，喷雾时间更短。

3.定制喷嘴：特定喷嘴将溶液均匀喷射到测试样品上，溶液流量可调节。

4.喷嘴安装在独立模块上，启用起雾功能时可轻松拆卸。

5.可编程触摸屏控制器，中英文操作，并可采集数据。

6.Standard test specimen racks are provided, capable of accommodating flat samples. For oversized and heavy three-dimensional samples (such as automobile hubs and engine components), grid kits with the same height as the support can be used. The enclosure is structurally robust, allowing for even distribution of the load.

7.The spray on/off time can be programmed directly to better control the corrosion rate.

Meet standard:

DO160 E/F/G  Salt spray test requirements

GB/T 20854-2007/ISO14993-2001

    Accelerated testing of corrosion cycles of metals and alloys exposed to salt spray, \\\\\\\"dry\\\\\\\" and \\\\\\\"wet\\\\\\\" conditions

GB/T24195-2009/ISO 16151:2005 Cyclic accelerated corrosion tests under acid salt spray, dry and wet conditions

GJB 150.11A-2009  Military equipment laboratory environmental test method salt spray test

GB/T 2424.17-2008/IEC60068-2-11:1981盐雾试验方法

GB/T 2423.18-2012/IEC 60068-2-52:1996 氯化钠交替盐雾试验方法

GB/T 2423.3-2006/IEC6008-2-78-2001试验室：持续湿热试验方法

GB/T 10125-2012/ISO9227-2006 人工气氛盐雾试验腐蚀试验

GB/T 31467.3-2015

    电动汽车用锂离子动力电池组及系统

 - 第3部分：安全要求和测试方法：盐雾测试

ASTM B117、ASTM B368

GB/T 10587-2006盐雾试验箱技术条件

GB/T 10586-2006 湿热试验箱技术条件

GB/T 5170.8-2008_电工电子产品环境试验设备试验方法盐雾试验设备