Portacabin in Qatar
In stock
by GHOSH METAL INDUSTRIES LLC
On Request
Ghosh Metal Industries LLC, Ajman, Dubai, United Arab Emirates are one of the top supplier and manufacturers of prefabricated Portacabin.
This Portacabins meets the demands in construction sites, security cabins, factories, toll booths and other similar areas where permanent construction is not required and useful.
Ghosh Metal Industries – Portacabin Manufacturer and Supplier in Dubai | UAE | Oman | Saudi | Qatar operations are run by our expert who have rich experience in this portable industry sector. The best practice process guidance as well as years of experience provide them to deliver compatible solutions as and when demanded by our customers.
Ghosh – Portacabin is fabricated from hot rolled quality steel duly welded, comprising of base frame, peripheral structure, self draining roof, entry doors and windows (as per our valuable customer requirement). All The corners shall be sufficiently strengthened to facilitate transportation, lifting and placing on site.
Ghosh Metal Portacabin Manufacturer and Supplier – United Arab Emirates portacabins base frame shall be made of mild steel channel section. The main structural element shall be of 100 mm x 50 mm ‘C channels and cross support of ‘C’ channels section size 75 mm x 40 mm with Extra Leg.
Ghosh Group Portacabin’s side and end frame shall be made out of pressed sections of suitable pillars of high strength.
Exterior wall shall be made up by 12 mm to 20 mm Cement Board / Gypsum Board / MDF board or Flat Sandwich panel top and bottom with Aluminium or GI Pre painted Sheet with 50 to 100 mm PU, subject to our customer request.
The Flooring System of Ghosh Group – Portacabin Manufacturer and Supplier in Dubai | UAE | Oman | Saudi | Qatar – maintains minimum space on the bottom frame 20 mm thick plywood, bison panel/cement. Fiber board shall be fixed by means of self taping screw.
Roof shall be made out by Single Skin Roof Profile Sheet or Roof Sandwich panel subject to our valuable customer choice, with epoxy paint on galvanized or aluminium subtract.
The interior of Ghosh Group Portacabin shall be aesthetically finished so as to give custom built appearance with extremely high quality workmanship. All vertically and horizontal corners shall be neatly and smoothly finished with Powder coated aluminium works.
The door shall be of external opening type made out of the same material as wall panels with door closing unit. The construction of the door shall be double skin steel construction with 50 mm thick PU insulation. Aluminum powder coated windows, sliding type shall be provided – made of aluminium , 6 mm thick, tinted glasses will be fitted on it.
Portacabin electrical work is always done with high care with the bunk house, provided with electrical wiring suitable for 250 Volt, 50 HZ / 60 HZ to support electric generator, single phase AC power supply.
All electrical wiring shall be concealed. Suitable copper cables shall be used for lighting circuits. The copper cables used will be of 3/19 cable for lighting circuits. ISI mark and concealed in PVC conduits insulated copper wire shall be used for wiring to be done in PVC conduit with small size distribution board with MCB, protection and to separate with main supply.
Ghosh Group – Standard Portacabin size for the site construction office in Dubai, UAE, Abu Dhabi, Qatar, Oman, KSA is 3 meter width x 6 meter length / 3 meter Width x 9 meter Length / 3 meter Width x 12 meter Width (1 Room, 2 Room, Bathroom).
(works on mobile or calling device)
If you are not Verified Buyer then Please Verify Your Email to get Quotes from Verified Suppliers.