Related Products

Description

This machine can be used to derust and streng then the surface of workpieces with mass productions.The workpieces must accept collision.This series machines can be singlely used or together with others.

This machine is in keeping with many species,big medium the batch quantity produces the durface of the workpiece in addition to becoming rusty or throwing the pill to enhance.Tidy up the workpiece and the hot processing pieces that musts be the not afraid collisiom.That machine since can single machine usage,can go together with the line usage again.

The projectile and sand particles flow into the screw conveyor at the bottom from the holes in the track, and are fed into the hoist by the screw conveyor, and separated by the hoist into the separator.After being filtered by a fan, the dust containing gas is sucked into the dust collector and discharged into the atmosphere. The dust is blown back into the dust collector at the bottom of the dust collector through the air, and the user can clean it regularly.Waste sand from the waste pipe, the user can reuse.The shot sand mixture is recycled into the chamber by the recycle tube and reused after the separator is separated. The layout of the shot blasting device is simulated by 3d computer dynamic simulation, and all the layout angles and positions are determined by computer design.On the basis of taking care of all the work pieces to be cleaned, minimizing the empty throwing of the projectile, thus maximizing the utilization rate of the projectile and reducing the wear of cleaning the indoor protective plate.