LIFECO LCD network annunciator LE-FN-LCK-N
In stock
by Lichfield Fire & Safety Equipment FZE - LIFECO
On Request
The LE-FN-LCD-N type LCD network annunciator is designed to be used with the Fire NET analog addressable system. It allows for remote access, monitoring & control of the Fire NET system throughout the building. The LE-FN-LCD-N is a true network annunciator that can access, monitor & control any or all Fire NET panels in the network. Each LE-FNLCD-N is completely independent. The highly intuitive user interface and 320-character LCD display of the LE-FN-LCD-N is exactly the same as the Fire NET panel. In addition to routing any panel in the network to the LE-FN-LCD-N, every event category within each panel can also be individually routed, as well as routing of all remote control functions (reset, alarm silence, re-sound alarm) from individual panels. The LE-FN-LCD-N supports the same RS485expansion port as the Fire NET panel, allowing for Fire NET expansion boards and accessories to be connected to the network annunciator. The LE-FN-LCD-N also has (4) output relays for fire, supervisory, trouble & auxiliary. The relays are programmable (except supervisory). Security is established by the use of a password or firefighters enable key. Designed to be aesthetically pleasing, the LE-FN-LCD-N is available in charcoal grey or red and can be surface or flush mounted using a standard trim ring kit.
Â
• UL 864 9th edition Listed
• 320 character liquid crystal display (8 line x 40 character)
• LED indicators for Fire, Supervisory Alarm, Pre-Alarm, Fire Output Active, Power On, On Test, Panel Sounder Silenced, Delay Active, More Events, Point Bypassed, General Trouble, Power Trouble, System Trouble & NAC Trouble
• Dual RS485 ports for primary fire network
• RS485 slave bus for expansion - up to
31 LE-FN-4127-IO boards or up to 15 LE-FN-LCD-S serial annunciators and up to16 LE-FN-4127-IO boards
• 2 built-in RS-232 interfaces for programming via a PC and serial printer interface
• 4 on board programmable Form C elays rated at 1 Amp at 30VDC (Fire, Supervisory, Trouble & Auxiliary)
•Same controls as the FireNET fire panel (Reset, Panel Sounder Silence, Lamp Test, Alarm Silence, Re-sound Alarm, Fire Drill, Programmable Function, More Events, More Fire Events, Enter & Exit)
• Local piezo sounder for event notification
• Supports user codes & firefighter key to enable access & controls
• Powered by FireNET Aux 24VDC or UL fire listed Aux. 24VDC supply
• Available in red or charcoal, and can be surface or flush mounted (using trim ring)
• True network annunciator, any or all panels can be routed to the LE-FN-LCD-N.
In addition, each event category can be individually routed to the LE-FN-LCD-N
• Up to (64) FireNET panels & LE-FN-LCDN’s can be networked together in any combination
• 500mA of auxiliary power available rated at 24VDC
• Auto-learn feature
• Built-in help & alarm information screens
• Fire drill function
• Each LE-FN-LCD-N is completely independent
• Supports up to (31) LE-FN-4127-IO boards on RS485 expansion port
• The LE-FN-LCD-N can be configured to remote reset, silence, resound, any or all panels on the network in any combination.
The contractor shall furnish and install where indicated on the plans, the network annunciator model LE-FN-LCD-N. The LE-FNLCD-N shall connect to the FireNET fire alarmcontrol panel (FACP) network. The network annunciator shall be capable of annunciating on its 320 character display and local buzzer, the condition of any FireNET FACP or network annunciator on the network. Up to 64 LE-FN-LCD-N network annunciators or FireNET FACP’s may be connected together on the network. The LE-FN-LCD-N shall be UL listed, and have surface or flush mount capability.
If you are not Verified Buyer then Please Verify Your Email to get Quotes from Verified Suppliers.
