GI Z,C Purlin In Oman
In stock
by GHOSH METAL INDUSTRIES LLC
On Request
In steel construction, the term Purlin typically refers to roof framing members that span parallel to the building eave, and support the roof decking or sheeting. The purlins are in turn supported by rafters or walls. Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows flexural continuity between spans.
It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes; Channel sections without flange stiffeners are also referenced as U shapes; Point symmetric sections that are shaped similar to the letter Z are referenced as Z shapes. Section designations can be regional and even specific to a manufacturer. In steel building construction, secondary members such as purlins (roof) and grits (wall) are frequently C, Z or U sections, (or mill rolled) C sections.
Cold formed members can be efficient on a weight basis relative to mill rolled sections for secondary member applications. Additionally, Z sections can be nested for transportation bundling and, on the building, lapped at the supports to develop a structurally efficient continuous beam across multiple supports.
Z & C Purlin Specification: ASTM A653, Galvanized Steel Coil Grade 50, SS340, Minimum YS 400 MPA, TS 450 MPA, Regular/Zero Spangle, Origin Korea, India, Saudi Arabia. Thickness: 1.5 mm to 3.5 mm
Web
Flange
Lip
Thickness
102
40
45
15
1.5 to 3.5mm
142
152
172
50
55
20
202
50/60
55/65
232
252
60
65
302
70/80
75/85
352
85/90
Our Main market of the Ghosh Metal Z and C Purlin: United Arab Emirates, Qatar, Oman, Africa, KSA – For any Clarification of Ghosh Metal Z & C Steel Prulin Please feel free to Contact Our Sales Team on 00971553258409 or Email to [email], Visit us on www.ghoshgroups.com
It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes; Channel sections without flange stiffeners are also referenced as U shapes; Point symmetric sections that are shaped similar to the letter Z are referenced as Z
If you are not Verified Buyer then Please Verify Your Email to get Quotes from Verified Suppliers.