CNC machine Vacuum Suction Cup Block Pods for PTP CNC Machining Centers
In stock
by Suzhou RicoCNC Machinery Co.,LTD
On Request
This CNC vacuum system is vacuum suction cups for wood working CNC router machines. The vacuum block pads is very suited for handling of workpieces in wood processing, such as furniture parts, floor boards, MDF, and particle board etc. CNC vacuum suction pods are widely used in the wood industry for vacuum suction clamp during machining, sanding etc with P.T.P. cnc machining center with vacuum pods bars. You are easily to find them on German and Italian woodworking machinery like Biesse, Homag/Weeke, SCM/Morbidelli, Felder, Format 4, MasterCAM, IMA, HOLZ HER, Masterwood and Greda Sirio etc.
1, Biesse ATS CNC Vacuum PodsATS is abbreviation for 'Advanced Table Setting'. These CNC pods are manually positioned. There is a white nylon support locating ring on the bottom of this kind of pod. The base bodies of the vacuum cups are inserted into a holding fixture on a pod and rail table. The base body and holding fixture have a grating that is divided into 15° steps. Thus, it is possible to position the vacuum cup in different angles on the pod and rail table. These CNC vacuum pods are easy to find in Biesse rover series CNC machine. There are three different heights: 29mm, 48mm and 74mm vacuum pods for Biesse.Here are the sizes for Biesse pods:29mm height CNC vacuum pods:Full-size pod: 132*146*29mmHalf-size pod (1/2 Size): 132*75*29mm1/3 Size pod: 132*54*29mm48mm height vacuum cups:Full pod: 132*146*48mmHalf pod (1/2 Size): 132*75*48mm1/3 Size pod: 132*54*48mm74mm Biesse CNC vacuum pods:Full pod: 132*146*74mmHalf pod (1/2 Size): 132*75*74mm1/3 Size pod: 132*54*74mmThese CNC suction pods include black suction valves, locating rings and gaskets.
2, Homag and Weeke CNC Suction BlocksThese suction blocks are manufactured by Schmalz. Schmalz is one of the world's leading suppliers in vacuum technology. It can provide a wide of product range includes a variety of suction cups with various shapes, sizes and materials. The suction cups for Homag and Weeke adopt a dual circuit system and the installation height is 100mm. They can be used on the normal K-table as well as on the AP-table (automatic positioning of the suction blocks).
The suction pods for Homag Weeke are made in different sizes:
Model
Height(mm)
Size
Schmalz Part No.
OEM P/N
VCBL-K1 125x75x50 Q
50
125x75x50mm
10.01.12.00211
4-011-11-0368
VCBL-K1 140x115x50
140x115x50mm
10.01.12.00210
4-011-11-0367
VCBL-K1 120x50x50 Q
120x50x50mm
10.01.12.00770
VCBL-K2 120x50x100 Q
100
120x50x100mm
10.01.12.00126
4-011-11-0117
VCBL-K2 125x75 x100 Q
125x75 x100mm
10.01.12.00951
VCBL-K2 160x115 x100 Q
160x115 x100mm
0.01.12.00949
VCBL-K2 160x115 x100
2-056-17-0920
VCBL-K2 140x115x100
140x115x100mm
10.01.12.00445
4-011-11-0072
VCBL-K2 140x115x100 AS
10.01.12.00446
4-011-11-0071
VCBL-K2 125x75x100 Q
125x75x100mm
10.01.12.00447
4-011-11-0073
2-056-17-0930
VCBL-K2 125x75x100 L
10.01.12.00506
VCBL-K2 120x50x100 L
10.01.12.00853
VCBL-K2 130x30x100 Q
130x30x100mm
10.01.12.00854
VCBL-K2 130x30x100 L
10.01.12.00855
VCBL-K2 120x50x100 D-360 with 360° rotatable top
10.01.12.01020
VCBL-K2 125x75x100 D-360
with 360° rotatable top
10.01.12.01079
Top and bottom suction plates for this kind of vacuum pods can be removed and replaced.
3, SCM CNC Vacuum PodsThese vacuum pods are easily found in SCM/Morbidelli and Greda Sirio CNC woodworking centers.SCM vacuum pods are available in two different sizes:SCM Morbidelli CNC suction pods: 50mm height 145 x 145mmSCM Morbidelli CNC suction cups (rotatable): 50mm height 145 x 55mm The rubber seal gaskets and bottom base gasket of these suction blocks are replacement parts.RicoCNC is dedicated to providing high quality and factory direct CNC vacuum pods and rubber plate pads, also can supply a comprehensive range of CNC & woodworking machine parts. If any needs, welcome to contact us.
If you are not Verified Buyer then Please Verify Your Email to get Quotes from Verified Suppliers.