Cement Remover RX Hold
In stock
by DUBI CHEM MARINE INTERNATIONAL
On Request
Active Matter:98-100 % Packaging:30.00 Kg. Application:
The hardened concrete is saturated with Back-Set, either with a brush or by spraying. After 15-20 minutes, the area is again saturated with the chemical. The concrete typically begins to soften in 20-30 minutes, and can be rinsed off with water.
The hardened concrete is saturated with Back-Set, either with a brush or by spraying. After 15-20 minutes, the area is again saturated with the chemical. The concrete typically begins to soften in 20-30 minutes,and can be rinsed off with water.The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of cement to be removed.5 to 20 % recommended .These are recommended values based on experience. For optimum results dose RXSOL-22-2202-025 directly to the surface .
The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of CEMENT to be removed . 5 to 20 % recommended .These are recommended values based on experience.
For optimum results dose RXSOL-22-2202-025 directly to the surfaceUndiluted : In cases where we deal with heavy deposit build–up, CEMENT REMOVER must be applied undiluted.Diluted : In cases of light deposition, on large surface areas, a solution between 10–40% may be used. B. Cleaning Procedure Undiluted/Diluted: In parts such as corner cavities, tank skeleton inlets, etc, Apply RXSOL-22-2202-025 through hard brush, mop, sponge or any other manual method. Let it soak for 15 minutes. Afterwards, wash thoroughly by applying high–pressure water source. In case of deposit persistence, repeat the cleaning procedure. Refer to technical datasheet.
If you are not Verified Buyer then Please Verify Your Email to get Quotes from Verified Suppliers.