Related Products

Description

Brake Fluid DOT 3 is a excellent performance hydraulic brake fluid. It is use in automotive disc, drum and anti skid brake systems and clutch systems. Typical properties vary depending on the supplier of the fluid. Typical properties for brake fluids include: Density at 20º C, boiling point, wet boiling point, flash point and viscosity at 40º and 100º C.

Applications :

Brake fluid dot 3 is developed for use in applications where disc, drum and anti-skid braking systems are used in vehicles requiring DOT 3 level performance.

1. Use only in its concentrated form out of a previously unopened or well sealed container.
2. Seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this can reduce service life significantly.
3. Do not reuse drained brake fluid.
4. Brake fluid can affect the vehicle paintwork, so remove spills without rubbing.
5. Brake fluid should be drained from the vehicle every two years or after 40,000 Kms.

CONTACT PERSON MR.ANKUR DANA : +96891781730, +971507983153