The System pro M compact complete miniature
system, designed by ABB to meet all the installation
requirements, expands its
offering with the new SN201 series 1P+N miniature circuit-breakers in a
module. Totally renewed,
these products replace the S9
series and perfectly integrate with the System pro M compact MCB range,
starting from the
identical profile, that lends a
coordinated and streamlined look to the installation.

The new 1P+N
miniature circuit-breakers are a technologically advanced and
comprehensive range, as concerns
size, tripping characteristics,
breaking capacity and accessories. They are available with rated
currents from 2 to 40A, in
the version with "C"
characteristic, and with rated currents from 6 to 40A, in the version
with "B" and "D" characteristics.
As for breaking capacity, the
range includes 4.5kA, 6kA and 10kA versions.

The ABB Tmax breaker has been developed to
complement the performance-proven Isomax line of circuit breakers.
This new breaker, with a range
up to 600A, has several very big features that go along with its very
small size.

• Double insulation
• Positive operation
• Tmax Series can be installed in panels and switchboards in either the horizontal or vertical planes while being fed from
  either end without any derating of their performance characteristics.
• Two ranges of accessories
• Interrupt ratings at 480VAC up to 150kAIC.
• UL Listed and IEC rated for global application and acceptance.

ABB RCDs provide ground fault equipment
protection by monitoring the leakage of current to
ground. The F200 and F670 series will trip when ground faults
are detected in excess of the GF trip rating of the device. These
devices provide GF protection only and are used in series with
standard MCBs which provide overload and short circuit protection.
The F200 and F670 series can be used as a main device
providing GF protection for several MCB branch devices.

• The F200 and F670 series are UL1053 recognized for use in 480Y/277VAC applications.
• The F202 and F672 is for use in single phase/two wire or two wire systems. The F204 and F674 is for use in three
  phase/four wire systems.
• The F200 and F670 series RCDs replace the F360, F370 and F660 series with no change in fit, form or function.
• The F200 and F670 have a profile similar to the S2 MCBs and can be used with the MCB busbars.

The S3 ABB Isomax breaker family ranges
from 15 through 225 amperes. The S3 trip
mechanisms are non-interchangeable and use sensitive
electromagnetic relays for overcurrent trip protection. Heat sensitive
bimetals are used for
S800PV High Performance Photovoltaic

The High-Performance MCB S800PV-S specially
developed for use in photovoltaic systems offers reliable
protection for PV modules and
lines against reverse currents from defective strings and AC
regenerative feedback due to
defective inverters. The high
demands of PV systems have already been taken into consideration in the
development of the
S800PV-S:

• Optimum protection for cost-intensive system components & Simple fault signalling
• Minimised standstill times thanks to reclosing capability & High ambient temperatures
• Covers all common PV system voltages and currents
• Selective string shutdown even under load
• Easy installation thanks to DIN rail mounting
• Remote shutdown using working current and low-voltage trips possible
• In operation worldwide in generator terminal boxes and inverters

ABB High Performance MCBs of the S800S
series limit energy and power in the event of a
short-circuit cut-off. The specially developed double arc
chamber system ensures these outstanding operating properties. Other
outstanding properties of the S800S are:

• Convincing: selectivity to upstream overcurrent protection equipment due to a total cut-off time of just
  < 2.5 ms.
• Safe: Outstanding back-up protection thanks to the feature of limiting energy to a value of < 100 000 A2s
  (125A/50kA).
• Loading Capabilities: up to 125A rated current
• Tested: 50kA rated ultimate short-circuit breaking capacity
• Optional: characteristics B, C, D, K, KM, UCB, UCK (UL489 series currently being prepared).
• Compact: the tiniest of dimensions.
• Flexible: accessories are fitted by the customer.
• Optimum: the new S800S is the perfect supplement to the existing ABB low-voltage range.

ABB's Emax series of low voltage power
circuit breakers embodies over half a century's experience and
technological development in
power circuit breakers. The Emax offers a series of breakers that is
totally innovative in its
technological design, ease of
installation and use, making it the ideal solution for the growing
requirements of designers,
switchboard and switchgear
manufacturers, installers, OEMs and users.

The Emax
power circuit breakers are UL Listed and meet the ANSI Standard for low
voltage power circuit
breakers. ABB Emax power circuit
breakers are available in five different models (four sizes) with rated
continuous current
from 800A to 5000A and rated
short-circuit current range from 42kA to 125kA (480V).

ABB presents the new generation of
automatic transfer switch, the result of a worldwide experience on low
voltage applications. The new
generation of ATS family - ATS021 and ATS022 offers the most advanced
and comprehensive
solution in power continuity.
Reliability, safety and intelligence are the top features of the brand
new range of ATS family
which is in compliance with
world standards, simple to configure and fitting all application
scenarios.

Moreover, the perfect integration with all ABB circuit-breakers and

Type MS Manual Motor Protectors

Manual motor protectors provide a reliable,
cost-effective solution for motor protection for the material
handling industry. The ABB Type
MS manual motor protectors (MPP) are a wide range of products providing
highly efficient motor
protection up to 100 Amps. The
short circuit breaking capacity of these devices can reach up to 100 kA
depending on the MMP
type used, without the need for
any special upstream protection.

Additionally,
the ABB Type MS MMP increases the reliability of applications due to
the quick reaction time,
switching off the motor within
3ms, under shortcircuit conditions that could cause motor damage.

The S500 heavy-duty ABB circuit breaker
fulfills these requirements by virtue of its
technical features. It is equipped with a thermal and/or
electromagnetic release to protect circuits, motors, switchgear and
systems from the effects of overload and short-circuit
currents.

• High breaking capacity
• Energy-limiting, Current-limiting
• Optimal selectivity
• Various versions for special applications
• Compact dimensions, DIN cap size

ABB galaxie circuit breakers are door mounted for AC and DC applications. The breakers offer
thermal-magnetic and magnetic-only trip protection.

• Convenient actuators: Switch type, rocker switch & pushbutton
• Various termination mountings
• Tropicalization protection
• 480Y/277 VAC
• UL 1077 Recognized - supplemental protective device. UL File # E75741.

ABB offers the best solution for restoring
the service condition rapidly in case of fault, providing at the
same time optimum protection of the electrical installation.
From the miniature circuit-breakers to the moulded-case and air
circuit-breakers of the standard and high-breaking capacity
type, with the ABB Low Voltage range, every technical problem has
been solved. A reliable and advanced reply which, thanks to
the interaction of electronics, is also present today in the control
and operation stages of electrical installations.

Our industrial factory automation supplies
distributors warehouse in Boise, Idaho USA stocks some ABB Circuit
Breaker products
enabling us to further assist
you in finding the correct ABB Circuit Breakers for your application in
the USA, Canada and
Mexico. Whether we have ABB
Miniature Circuit Breakers in stock in Boise, Idaho USA or need to get
them from ABB SACE; Clearwater
Tech can get ABB Molded Case
Circuit Breakers to you fast and save you some money! It will be very
helpful if you have the ABB
residual current device part
numbers ready, then our sales representatives can provide you with a
pricing and availability quote for ABB
Miniature Breakers that you are
looking for in seconds. If you do not have the part numbers for ABB
Molded Case Circuit
Breakers, our application
engineers will be able to help you figure out the part numbers and get
the price quote to you as soon
as possible.