3-Glycidoxypropylmethyldiethoxysilane [3-(2,3-Epoxypropoxy)propyl]diethoxy methylsilane CAS NO.: 2897-60-1
In stock
by Zhengzhou Bond Performance Materials Co., Ltd
USD 1
OSi HIOSil GLYMEO
Epoxy functional organosilane
Product Description
Chemical Name:
3-Glycidoxypropylmethyldiethoxysilane
Synonym:
3-(2,3-Epoxypropyloxy)propylmethyl
diethoxysilane;
[3-(2,3-Epoxypropoxy)propyl]diethoxy
methylsilane
CAS NO.: 2897-60-1
EINECS NO.: 220-780-8
Properties
Silane OSi HIOSil GLYMEO can be used in much the same way as other organofunctionalalkoxy silanes. It can be used as a primer for inorganic surfaces. Aqueous solutions can be prepared by adding the silane to acidified water and stirring. It is possible to treat glass fibers, mineral fillers, metallic surfaces and similar “inorganic” materials using a variety of application techniques. After applying the silane to the surface, the treated surface should be dried to promote a good level of reaction with the surface. Optimum application level, application method and curing conditions will vary and should be determined for each use before implementation in a commercial process.
Typical Technical Data
The below values are not intended for use in
preparing specifications. Please confirm with us prior to writing specifications on this product.
Appearance: Colorless transparent liquid
Colour (Pt-Co): 30 max.
Specific Gravity (ρ20°C,g/cm3): 0.9730~0.9830
Refractive Index (nd25°C): 1.426~1.438
Purity (by GC, %): 97.0 min
Applications
Silane OSi HIOSil GLYMEO is an essential ingredient in many industries as follows:
§ Excellent wet and dry adhesion, without yellowing
§ Enhances tensile strength, while maintaining elongation performance
§ Improves tear strength and durability
§ Performance consistency with aging
§ Improves water resistance of cured material
Safety & Storage
Customers should review the latest MSDS and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS is available at your request.
Keep away from heat and open flame. When stored at or below 25 ℃ in the original unopened containers, this product has a usable life of 12 months from the date of production.
Packaging
In 25kg, 200kg drum and 1000kg IBC
Contact Information
OSi Holding Limited
Holdings Group Corporation:
Room 803, Chevalier House 45-51, Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong
T +86 133 6565 2375
F +852 2136 6546
[email]
www.osisilicones.com
Domestic China Market:
Nanjing Partners New Materials Technology Co., Ltd.
No. 153 Shuiximen Avenue, Jianye District, Nanjing, Jiangsu Province, P.R. China
Tel: +86-187-6185-8936
Fax: +86-25-5860 5215
If you are not Verified Buyer then Please Verify Your Email to get Quotes from Verified Suppliers.
